Product Description
STAGE 4 - 2026 -ROLLING CARBON FIBER, PRO BRACKET / TOP DRAGSTER SWINGARM CHASSIS
(WILL 6.00 NHRA CERTIFY FOR TOP DRAGSTER AND ADVANCED ET)
NOTE: SOME PICTURES SHOW WITH AND WITHOUT OPTIONS OR UPGRADES INSTALLED
WE CAN ADD CHANGE OR DELETE ANY OPTION FROM ANY STAGE CAR, THAT YOU WOULD LIKE. JUST CALL 501-284-DRAG
| * Fixture Pro Tig Welded Chassis and Mounts | * .090 Ignition Mount Tray |
| * Computer Aid Designed Chassis | * Battery Charge Terminal |
| * 23" TO 24.5" Shoulder Width Available | * Racecraft One Piece Carbon Fiber Body |
| * 200" / 243" / 252" Wheelbase Available | * Carbon Fiber Engine Body Side Panels |
| * (200" Only Available with 23.5" Shoulders) | * Carbon Fiber Nose Piece |
| * 4130 American Made Chromoly Chassis Tubing | * Stainless Ground Studs Throughout Chassis |
| * Exclusive Upright Pivot Slip Joints | * Sharp Turn Steering Rack and Pinion |
| * Innovator of Slip Joint Chassis (Since 1987) | * Steering Arms and Spindles |
| * Will Certify For Advanced ET or NHRA Top Dragster 6.00ET | * Tie Rod Ends with 3/8 Heim Joints |
| * Master Cylinder Mount | * DNRC SuperFly Billet Alum. Steering Wheel |
| * Adjustable Pedal Assembly Throttle and Brake | |
| * Brake Line Access Holes in Chassis | |
| * Brake Line Mount Tabs | * CNC .125" Driver Protection Plate 1/8 Alum - Powder Coated |
| * Helmet Tab | * CNC 6061-T6 Alum Engine Plates - Powder Coated |
| * Streamline Bi-Pod Front End | * DNRC Fabricated Rear Swingarm Mono Shock Housing |
| * Parachute Mount | * Drain and Fill Caps on Rear Housing |
| * Parachute Lever Mount | * Semetrical Housing Ends |
| * Carbon Fiber Seat | * Grade 8 Hardware |
| * Tinted Lexan Windscreen | * Powder Coat Chassis (YOUR COLOR) |
| * Racecraft Alumunium Fuel Cell, With O-Ring Base Bungs | * Powder Coat Components (YOUR COLOR) |
| * Extended Fuel Cell Neck, With Alum Filler Cap | * DNRC Embroderied Padded Seat Cover |
| * Carbon Fiber Floor Pan | * Accelerator Cable and Ends |
| * Aluminum Foot Cover | * Parachute Cable / Levers and Ends |
| * Steering Shaft Adjustable with Solid Stop | * Cockpit and Rear Master Cut Off Switches and Solenoid |
| * Carbon Fiber Dash | * Carbon Fiber Rear Suspension Cover |
| * Dzus On Dash Top | |
| * Seat Belt Mount Tabs | * Engine Mounting Aircraft Clamps (pair) |
| * Vacumn Tank Breather Cannister Mount | * DNRC Aluminum Radiator / Fan / Shroud with Expansion Tank |
| * Coolant Recovery Tank Mount | * Interior Lights (pair) |
| * Radiator Mounts Rear, Behind Trans. | * DNRC Pro Anti-Roll Bar Assembly |
| * Mono Strut Rear Wing Mounts | * Chromoly Driveshaft / Billet Ends / U-Joints / Trans. Yoke |
| * Trans. Fluid Breather Tank Mount | * (2) Starter Aux. Push Buttons (Rear Each Side Motor) |
| * Trans. Cooler Mount | * DNRC Fuel Cell (full) Light and Sending Unit in Cell |
| * Remote Water Pump Mount | * DNRC Oil Retention Pan |
| * Aircraft Dzus Tabs and Mounts | * LED Tail Light |
| * Dual Battery Mounts (Front and Mid) | * 1-1/4" X .095 Chromoly Swingarm and Top Bars, With Heims |
| * Biondo Elite Shifter Mount | |
| * DNRC Oil Retention Pan Mount Tabs | |
| ** STAGE 4 CHASSIS INCLUDES COMPONENTS AND UPGRADES LISTED BELOW, INSTALLED ON CHASSIS ** | |
| * Moser 40 Spline Axle Kit (axles / bearings / studs) | * MSD Grid System 7720 Ignition Box and 7730 Controller |
| * Moser Performance DUAL Rear Brake Kit | * Digital Delay Black Mega Dial 625 Delay Box |
| * Moser Pro 40 Spline Alum. Rear Lightweight Center Section Pro Gear | * Digital Delay Black Elite Mega Switch Panel |
| * Dual Brake Line Kit | * Snap Action Mushroom Button with Cord X 4 |
| * Hand Brake / Master Cylinder for Dual Brake Application | * XS Power D1600 16-Volt Battery |
| * Wiring Tie Rails (eliminates tie wraps around frame rails in most areas) | * RaceStar Pro Forged Rear 16X16 Double Bead Lock Wheels |
| * Pro-Wire Complete Car Materials and Labor (NO NITROUS) | * RaceStar Dragster Front Wheels (Polished or Black) |
| * Battery Charge Terminals | * Choice 16" Rear Slicks (pr) |
| * White Safety Parachute | * Choice 17" Front Tires (pr) |
| * PRO1 Safety CamLoc Style Belts | * Mount and Balance Front and Rear Tires |
| * Allen Head Black Alum. Dzus Button Set | * Racepak IQ3D Logger Dash |
| * DNRC Trans Cooler WITH Rubber isolation mounts | * Racepak includes Oil, Water, Drive Shaft, Fuel, Trans Senders |
| * Complete Chrome OR Black Elite Outlaw Shifter (Air OR Electric) | * Racepak 8 Magnetic Collar Driveshaft Collar |
| * JRI Pro Double Adjustable Gas Shock and Spring | * Racepak V-Net Extension Cables (pair) |
| * Chrome or Black LED Ultra Headlights | |
| * DNRC Pro Trans / Engine Limiters and Trans Ring Plate | * Allen Head Black Alum. Dzus Button Set |
